How to Remove Dark Spots From Vinyl Flooring

How To Remove Dark Spots From Hardwood Floors | Hardwood floors, Remove  dark spots, Scratched wood

If you are wondering how to remove dark spots from vinyl flooring, there are several methods you can try. Some of these include using Oxalic acid, baking soda paste, or laundry detergent. But which of these methods will work best? Let’s discuss each of these methods below. They all contain natural ingredients that will remove the spots. If one method doesn’t work, try the next. These are the most effective and safest methods for removing stains from vinyl flooring.

Baking soda paste

If you’re worried about stubborn stains on your vinyl flooring, a simple solution may be to mix vinegar and water. Then, you can use this solution to clean the area. After you’ve finished, rinse the floor thoroughly. Repeat the process if necessary. You can also use a baking soda and water paste to lift stubborn stains. To apply the paste to the stain, rub it on with a rag.

Another effective DIY solution is to mix baking soda with water and use a soft cloth to wipe the surface. After an hour, you can wipe the paste off the vinyl flooring. If you’re unable to remove the stain after the first step, you can follow up by applying a solution of plain white vinegar to the area. This mixture will foam up. Allow it to sit for an hour before wiping it off.

Oxalic acid

If you have a spot on your wood flooring that cannot be removed with a regular stain remover, you can try using Oxalic Acid. You can also use this solution on pet urine damage. You can mix one quart of Oxalic Acid with one gallon of water and use a mop or brush to apply the solution. This method is also effective for removing water spots and rust stains on wood floors.

Before using Oxalic Acid to remove dark spots on your flooring, make sure you wear protective clothing. You should start by wearing long sleeves and pants and work in a well-ventilated area. You should also keep a pail of fresh water handy. This way, you can wash away the Oxalic Acid from your skin. However, you should always remember to use a protective mask and wash off the acid on your skin thoroughly after using the solution.


You can use bleach to remove stains from vinyl flooring, but it is important to use it as a last resort and only when you have no other option. Before using bleach to remove a stain, you should test it on a small area first to make sure it won’t damage your flooring. Wear rubber gloves and make sure that you have turned off your gas stove’s pilot light. If the stain is a liquid, use a solution of one part bleach and two parts water. Leave the solution on the stain for one hour and rinse off with water.

Another solution for removing blood stains is baking soda. If you use baking soda, you can apply it to the stain and leave it for 15 minutes. After that, use plain water to rinse away any remaining residue. If you don’t have baking soda, you can also use rubbing alcohol. Always make sure to wear rubber gloves when cleaning the flooring, as they will protect you from the bleach. Another alternative to bleach is to use a solution of one part water and four parts bleach. You can pour the solution directly onto the stain, or you can spray it on the tile.

Laundry detergent

Bleach and laundry detergent can both remove stubborn stains from vinyl flooring, but these chemicals can damage your floors. You can also apply a solution of laundry detergent and water. Make sure you wear rubber gloves and rags, and apply it to a small area before applying it to the entire floor. Remember to use the rags carefully, so they don’t drip and stay on the stain for the entire time you need to clean it.

Laundry detergent has a higher concentration than floor cleaners, making it better suited for deep cleaning floors. Nonetheless, it won’t be effective in high traffic rooms. If you want to use a mild cleaning solution on your floors, you can try a commercial floor cleaner. It should also contain a pH-neutral detergent. But, you should use commercial cleaners only if you are confident that they are safe for vinyl flooring.

Non-wax shine loss products

If you have no-wax vinyl flooring, you may want to try a no-wax shine loss product to remove dark spots. While this product doesn’t require rinsing after cleaning, it will leave behind a thin film that can make the vinyl floor look dull. However, it’s important to note that this method isn’t recommended for older vinyl floors, as re-waxing may be necessary.

The first step in removing dark spots from no-wax vinyl flooring is to clean it regularly. It is important to clean the floors regularly, as cleaning them with heavy-duty products can damage the floor’s surface. Also, the cleaning solutions should be pH eight or nine or lower, so they don’t damage the flooring. Also, check the manufacturer’s recommendations for the type of floor you have, as they will list their recommended products.

Cleaning up stubborn stains with household items

In most cases, a stubborn stain on vinyl flooring can be removed using a combination of household items. WD-40, jojoba oil, or even vinegar and water can remove stubborn scuffs and stains. In cases where an ink or food stain is present, you can apply a paste of baking soda and water. If a rubbing alcohol solution is not available, you can try a baking soda solution.

For stubborn stains on vinyl flooring, a household solution of one part bleach and two parts water can be used to remove them. However, you must ensure good ventilation while using these chemicals. Make sure to wear rubber gloves when using any cleaning solution, and always test the cleaning solution on a hidden area first. Alternatively, you can apply a solution to the stain by soaking a rag in it.